Archive for November 30th, 2018

30
Nov
18

Wire cutting a Glider Fuselage

I blocked out the foam with a profile and template locations 1-23.

Went to start cutting the profile right and left halves on the band saw only to find that my band saw didn’t have the clearance to cut 4 inch foam by a quarter of an inch. Now what? I considered going and buying and new larger band saw when I stepped outside in the back of my shop and saw that my neighbor’s bay doors to his shop were open and staring at me was this huge old bandsaw. I spent the next 2 hours there and cut the profiles and the cross sections.

I had a lot of foam left over so I took and piece and using the two formers I had cut already (F10-F11) and made a test cut freehand with the smaller bow I made using the old battery charger on 6 volts. I haven’t done this in years so I didn’t want to waste a actual section. The cut came out pretty clean and I was pleased.

Dug out my old “Feather Cut Bow” (remember those for cutting wing cores?) and will be stringing it up for better cuts on larger sections and wing core sections.

This was fun to do and it all came back to me. No matter what I will be using lite spackle on the foam to smooth over the areas were the bow hung up. After that I can glass it with 4oz and epoxy. 

I was thinking of using two layers of soft 4oz cloth but then again I have the strength of the foam so 1 layer may be enough and as always I want to keep the weight down. I’ll know after I get the first layer on because I’ll be able to see how strong it is. I can always add another layer.

The templates worked out well. The wire traveled well over the CA hardened edges. Tomorrow I’m going to cut more templates and more foam sections. Bit by bit I’ll have the shape of the fuse.

30
Nov
18

USS Defiant update

Progress on the Defiant

I forgot how hard it is to install this many lights and sound effects, switches and run it all down a tunnel to the base where the board resides. A Tenacontrol board at that. It has three plugs on the board that easily disconnect in case the board ever has a problem to easily replace it. Never put your board inside the model.

I just taped the model together for a look. I did a lot of simple tricks to get things to light up without removing or drilling out parts of the model as other have done in the past. 

I also used Don’s Light and Magic parts. Just wonderful products he makes.

The coloring on the model is all taken from the studio model and this will be roughed up, scratched and weathered to match the studio model. I don’t like my models to look like toys with pristine paint jobs, they just lack scale and life.

Video will becoming and I’ll get into more of this then. This model has lots of push button lighting effects and sounds that my client wanted. Now I say client because I’m not getting material money and a pat on the back along with social media kudos for building this model. When you get an actual profit for all your hard work, experience and expertise then you can call it a clent build.




November 2018
M T W T F S S
« Oct   Dec »
 1234
567891011
12131415161718
19202122232425
2627282930  

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 327 other followers